Atmel Rolls Out Development Kit for CryptoMemory
Atmel(R) Corporation (Nasdaq:ATML), announced the release of the AT88SC-DK1 development kit for its CryptoMemory(R), an advanced cryptographic family of memory products. Current CryptoMemory development requires developers to understand details of the cryptography and associated cryptographic algorithms of the CryptoMemory device in order to perform mutual authentication, data encryption, and generation of encrypted Message Authentication Codes (MAC) for secure communication with the device. AT88SC-DK1 simplifies the application development process by providing a library that completely implements host cryptographic operations required for secure communication with CryptoMemory devices.
Cadence Announces Virtuoso Multi-Mode Simulation
Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global electronic-design innovation, unveiled Cadence(R) Virtuoso(R) Multi-Mode Simulation (release MMSIM 6.2), the electronic design industry’s first end-to-end simulation and verification solution for custom IC that uses a common, fully integrated database of netlists and models to simulate analog, RF, memory, and mixed-signal designs and design blocks. This breakthrough allows designers to switch from one simulation engine to another without compatibility issues or interpretation impacts, so consistency, accuracy, and design coverage are improved, while cycle time and risk are reduced. The overall result is lower cost of adoption, support, and ownership, and faster time to market.
Cadence Introduces Allegro Platform for PCB Design
Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global electronic-design innovation, announced new product and technology enhancements within the Cadence(R) Allegro(R) system interconnect design platform for printed-circuit board (PCB) design. The enhanced platform, which includes Global Route Environment technology, establishes a unique paradigm for PCB designers, offering significant new capabilities for constraint-driven design, as well as new technology and enhancements to improve usability, productivity and collaboration among design teams in the IC, package, and board domains.
Synopsys Debuts USB 2.0 On-The-Go PHY IP for TSMC’s 65nm Process
Synopsys, Inc. (Nasdaq:SNPS), a world leader in semiconductor design software, announced that its DesignWare(R) USB 2.0 nanoPHY is the first USB 2.0 PHY intellectual property (IP) for TSMC’s 65-nanometer (nm) process to successfully pass the USB Implementers Forum Hi-Speed On-The-Go (OTG) PHY certification. Synopsys’ industry-leading USB 2.0 nanoPHY mixed-signal IP, now available in the TSMC 65-nm process nodes, uses half the power and die area compared to previous USB solutions and enables faster time-to-market and reduced risk.
UMC, Mentor Graphics Team on Calibre YieldAnalyzer DFM Flow
Mentor Graphics Corporation (Nasdaq: MENT) announced that UMC has expanded its support for the Calibre(R) nm Platform with Calibre YieldAnalyzer(TM) for all major design flows for its 90 nanometer (nm) and 65nm processes. Mentor and UMC have worked collaboratively to introduce Design for Manufacturing (DFM) capabilities that give designers highly valuable information to guide physical design improvements that can increase production yields.
Magma Offers Royalty-Free Patent License for Power-Aware EDA Tools
Magma(R) Design Automation Inc. (Nasdaq: LAVA), a provider of semiconductor design software, announced the availability of a patent license that allows electronic design automation (EDA) software developers to implement power-aware EDA tools based on concepts and claims in a Magma patent application that describes automated design of integrated circuits (ICs) with multiple voltage domains. This royalty-free, non-reciprocal license provides EDA developers and their end users with open access to fundamental low-power design technology.
Opera, TI Announce Browser for DaVinciT Technology
Driving further functionality for digital video applications, Opera Software and Texas Instruments Incorporated announce the availability of the Opera browser for DaVinciT technology. DaVinci technology is an integrated system of processors, software, tools and support so developers can more easily create a range of innovative, cost-efficient digital video products. With the full-featured Opera browser, TI DaVinci customers can now bring the Internet along with Web and AJAX applications to a wide variety of devices, including VoIP phones, digital cameras, set-top boxes and portable media players.
Wind River, Curtiss-Wright Target Aerospace, Defense Market
Wind River Systems, Inc. (NASDAQ: WIND), the global leader in Device Software Optimization (DSO), and Curtiss-Wright Controls Embedded Computing, the industry’s most comprehensive designer and manufacturer of commercial off-the-shelf (COTS) VME, VPX, and CompactPCI products for the Aerospace and Defense (A&D) market, announced that Curtiss-Wright’s Linux Center of Excellence, located in San Diego, California, will support Wind River(R) General Purpose Platform, Linux Edition and the Wind River Real-Time Core for Linux solution as their standard Linux operating environments for use on the company’s x86-based platforms.
Catalyst Semiconductor Introduces 4 Voltage Supervisors
Catalyst Semiconductor, Inc. (NASDAQ:CATS) a supplier of analog, mixed-signal and non-volatile memory semiconductors continues to rapidly expand its family of voltage supervisors with four new devices that give designers industry-standard performance for monitoring the power supply (Vcc) status of a microprocessor, microcontroller, ASIC or other system processor. The CAT853, CAT863, CAT859 and CAT869 extend Catalyst’s family of industry-standard supervisor circuits, providing an even broader range of pin combinations to meet the diverse application requirements of the embedded control market.
LTX Creates New DSP Instruments for X-Series Test Systems
LTX Corporation (Nasdaq: LTXX), a leading provider of semiconductor test solutions, announced a new suite of digital signal processing (DSP) instruments for its family of X-Series test systems. The new instruments, including a high speed arbitrary waveform generator (AWG) and high speed digitizer, incorporate LTX’s proprietary digital processing technology. The addition of these new instruments to LTX’s portfolio of DSP options enables X-Series test systems to provide the fastest test times and highest test accuracy for a broad range of mixed signal applications, including RF wireless cellular, networking and gaming; analog and digital video; wireless and wired baseband; automotive infotainment; and portable and system power management.
NI Releases LabWindows/CVI ANSI C IDE, Measurement Studio 8.1.1
National Instruments (Nasdaq:NATI) announced the release of the newest versions of LabWindows/CVI, the proven ANSI C integrated development environment, and Measurement Studio, a comprehensive suite of libraries and user interface controls for applications built using Microsoft Visual Studio. LabWindows/CVI 8.1.1 and Measurement Studio 8.1.1 provide support for Windows Vista to help engineers easily transition to the newest version of the Microsoft operating system. As scheduled maintenance releases, LabWindows/CVI 8.1.1 and Measurement Studio 8.1.1 also include bug fixes for improved performance and reliability.
Xilinx Announces 65nm Production Qualification of LX50, LX50T FPGAs
Xilinx, Inc. (NASDAQ: XLNX), the world’s leading programmable logic device (PLD) provider, announced production qualification of the first two devices in its award-winning 65nm Virtex(TM)-5 FPGA platform, the LX50 and LX50T. Delivering the benefits of 65nm Virtex-5 FPGAs since May 15 2006, the company is now shipping a total of 13 devices across three of the family’s four platforms (LX, LXT, and SXT), providing the highest performance and lowest power without compromises, the industry’s only built-in PCI Express(R)(TM) endpoint and Gigabit Ethernet blocks, and the industry’s highest DSP performance.
Hitachi Selects Xilinx Virtex-5 FPGAs for Industrial Cameras
Xilinx Inc. (NASDAQ: XLNX), the world’s leading provider of programmable logic solutions, announced that its 65nm Virtex(TM)-5 LX FPGA has been selected for the KP Series of industrial cameras manufactured by Hitachi Kokusai Electric Inc. (TSE, OSE: 6756). Hitachi Kokusai Electric is among a growing number of industrial networking manufacturers to realize the density and power advantages of Xilinx high-performance Virtex-5 FPGAs to achieve ultimate design flexibility and faster time-to-market.
XJTAG Supports Xilinx Virtex-5 FPGA System Monitor
XJTAG, a leading supplier of IEEE Std. 1149.1 compliant boundary scan tools, has enhanced its development system by adding support for Xilinx’s recently announced new feature, the Virtex-5 FPGA System Monitor. This will provide XJTAG users with easy access to what is the industry’s first FPGA analogue debug and system management tool for thermal management and measurement of on-chip power supply voltages.
Cebatech Unveils GZIP CebaIP Cores for Storage, Data Networking
CebaTech Inc., an innovative intellectual property (IP) developer using state of the art in-house electronic system level (ESL) development tools, announced the availability of the GZIP family of CebaIP Cores(TM). The GZIP family provides comprehensive, standards-based, lossless data compression for use in storage and data networking ASICs and FPGAs. Integrating the GZIP family of IP cores onto storage and data networking integrated circuits (ICs) can greatly reduce the operational costs of storing and transmitting data by end users of these ICs. Designers can choose from a number of available configurations to meet their desired speed, compression efficiency, and area requirements.